Cigraph USA has a broad selection of Flexible material, Green Supplies, Ink and Rigid Materials for your Print Shop or Digital Printing Company

¿Alguna Pregunta?

¿Tiene alguna pregunta sobre estos productos? Le interesaría saber más información o precios?Por favor llene el formulario de abajo y lo estaremos contactando para responder a todas sus preguntas.

4.0mm - Wall fabric film - Wall frog (54" x 100')

4.0 mil matte white polyester fabric with an acrylic removable pressure sensitive adhesive backed by a 90# Layflat liner. Concept? 250 is formulated and manufactured to be chlorine and phthalate free*. The combination of fabric and adhesive allows removability of this product from normal wall surfaces. The 90# release liner provides excellent stability for processing using standard solvent, eco-solvent, UV curable and latex digital inks common to wide format digital printing systems.
Concept® 250 is designed for temporary application of decals and graphics to most types of painted interior walls. This includes most flat, semi gloss and gloss paint finishes. Decals may also be applied to sealed wall coverings. The surface must be smooth and clean prior to application. Consult with paint manufacturer for correct paint cure time before applying Concept® 250 to freshly painted surfaces.  Not designed for coated/ sealed/ treated stainless steel, brass or bronze surfaces
Film Thickness:
4.0 mils.
(Thickness variation +/- 10%)
Adhesive Thickness Side One:
33.5 G/m^2
(Thickness variation +/- 10%)
Liner Thickness Side One:
6.7 mils.
(Thickness variation +/- 10%)
Temperature Ranges:
Minimum application temperature +40°F.
Service temperature -40°F to +200 F.
Dimensional Stability:
To standard test panels 4 to 12 oz. /in. Tested according to PSTC-101 Method A procedures with 24 hour dwell at 70°F and 50% relative humidity. Typical values. Individual values may vary. Bond to wall surfaces may vary. Test thoroughly before production.
Removable up to 6 months under normal interior exposure conditions and applications. Removal of wall fabric should be done at a 180° angle while pulling slowly against itself.
Storage Stability:
6 months shelf life when stored at 70°F and 50% relative humidity.
Product Codes:
Concept® 250-54 (54” x 100’)
Concept® 250-60 (60” x 100’)
Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent penetration resulting in product failure.

*Chlorine and phthalates are not intentionally added to the formulation of Concept® 250. There is a possibility of trace contamination during raw material manufacturing.

Wall fabric film - Wall frog - 4.0mm

P/N: GF-WF250-54

Dimensions (W x L): 54 x 100